3.5" Hard Drive HDD - 12 Capacity Wheeled Waterproof Turtle Case
Holds 12 hard drives (with or without hot swap frame), wheeled, airtight, waterproof.
Turtle media storage and transport case, holds 12 hard drives (with or without hot swap frame). Wheeled, airtight, waterproof, impact resistant, automatic pressure release valve, padlockable, meets airline carry-on regulations, lifetime warranty against manufacturing defects.
1. Waterproof, dustproof, airtight, high performance gasket
Water and dirt are the enemies of sensitive storage media. Waterproof Turtle Cases are IP67 rated to ensure that your equipment stays dry and dust free. An IP67 rating requires the case to be waterproof to a depth of 1m (3.3ft) for a period of 30 minutes and to be impervious to dust. The waterproof seal used in all watertight Turtle Cases is custom designed to fit our products. The hollow core design prevents material deformation or fatigue of the seal to ensure watertight cases that will last.
2. Impact resistant, crushproof, lightweight NK-7™ resin
Turtle tough cases were designed with one objective in mind: survival. With rounded corners, thick wall construction and oversized details, Turtle durable hard sided cases are built to absorb the shocks without damaging the case or more importantly your contents. Lightweight, rugged, dependable, and efficient; Turtle impact resistant and tough hard sided cases will never let you down.
3. Automatic pressure release valve
Changes in altitude and geographic location create a vacuum which can effectively seal a case shut. Waterproof Turtle Cases are equipped with an automatic pressure release valve. This integrated auto-pressure valve automatically equalizes the atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
4. Double padlockable
The cases come equipped with two padlockable hasps moulded directly into the case for superior strength. High quality ABUS padlocks and MediaVault single use seals are available as an option to keep your items secure within your case.
5. Powerclaw latching system
The PowerClaw latching system used on waterproof Turtle Cases is engineered to keep your case closed during the toughest of missions. The PowerClaw clamps the case tightly closed using compressive force while the integrated slide lock prevents the case from opening during transport or when dropped. The super tough nylon construction ensures your precious items remain safely inside the case.
6. 100% stainless steel hardware
The hardware found on waterproof Turtle Cases is marine grade 304 stainless steel. By using the highest quality materials available the case will perform as well 10 years from now as it did on the day you purchased it.
7. Soft grip foldable handle with handle stay
Turtle Case is tough and durable, but it does have a soft side. The handle structure is molded with the specially formulated high impact NK-7 resin but is over molded with a soft touch rubber for comfort. The soft shock absorbing material reduces fatigue when carrying heavy loads. The integrated stays keep the handle folded down to avoid damage during transport or shipping.
8. Integrated lid stay
Waterproof Turtle Cases have integrated lid stays molded into the hinge that keep the case lid open when you need it to stay open. No more pinched fingers.
Waterproof Turtle Cases are stackable with other cases of the same size. Integrated feet on the rear of the case interlock with the front of the case, allowing for multiple cases to be safely stacked on top of each other to save space or for transport.
10. Meets airline carry-on regulations
11. Lifetime warranty against manufacturing defects
Waterproof Turtle Cases are tough and durable, but don’t just take our word for it. Waterproof Turtle Cases were tested by an independent testing laboratory for compliance with the following standards:
- ATA Specification 300 Category 1 Impact tests
- ASTM D-4169 DC-18 Drop tests
- ASTM D-4169 DC-18 Vibration tests
- ASTM D-4169 DC-18 Rainfall tests
- MIL-STD-810F Immersion tests
- IP 67 Ingress protection tests (dust & immersion)
Waterproof Turtle Case sizes were awarded certification after successfully completing the tests.
- Turtle Case
- 12 hard drives (with or without hot swap frame)
- External dimensions
- 559 mm x 356 mm x 229 mm | 22.0″ x 14.0″ x 9.0″
- Internal dimensions
- 521 mm x 287 mm x 191 mm | 20.5″ x 11.3″ x 7.5″
- Weight (empty)
- 6.8 kg | 15.1 lb
- Lid Depth
- 53 mm | 2.1″
- Base Depth
- 137mm | 5.4"
- lightweight NK-7™ resin
- Max buoyancy
- 26.4 kg | 58 lbs
- Temperature range
- Min -29°C (-20°F) | Max 60°C (140°F)
- Airline carry-on
- lifetime warranty against manufacturing defects